Acoustic revive的電源盒有別於單純增加插口的電源插座。
通過設法提高S/N比，質感和銀色，打造立體感強的 3維新力聲系統。
其效果已遠遠凌駕於電源裝置或絕緣變壓器。
配備降噪功能的出風口穩定器CS-3K
RTP-Final 現在為流行的插座穩定器 CS-3K 配備了新的降噪功能。
此降噪功能可消除電力線上的高頻噪聲，顯著提高信噪比。
RTP-Final不僅在電源線上具有此雜訊消除功能，而且在接地線上也具有此雜訊消除功能，甚至可以消除接地線上的高頻雜訊。
電源盒內部的降噪功能也進行了升級
RTP-Final一如既往，在經過機械加工的A2017S航空級鋁合金外殼內，搭載天然礦物綠碳化矽+鋰電氣石粉末，在吸收消除電源噪音、地線噪音的同時，還能防止靜電的產生。 而這次加入了包括全球負離子含量最多的貴陽石等多種礦物，防靜電的產生
底部減震性能提升
RTP-Final的腳從先前的鍍鉻機械加工黃銅+減震片升級為鍍金機械加工黃銅+新開發的矽溶膠浸漬矽膠絕緣子的組合。
這種浸漬了貴陽石的矽膠絕緣子單獨以 RKI-1803 的形式出售，它是廣受歡迎的 RKI-5005 的較小版本，能夠、強力吸收和消除來自地板的振動。
出口和入口均採用最高品質的NCF材料和純銅電極製成
RTP-Final的出線口和進線口一如既往地採用與FURUTECH共同開發的防靜電樹脂NCF材料以及可實現100%導電性的純銅電極。
其他音頻級和醫院級插座的電極採用的是目前導電率最高的材料，例如銅碲和銅鈹，但與導電率100%的純銅電極相比，其導電率僅為50%左右，因此差異顯而易見。
內部接線也都是最高品質的。
與以往一樣，RTP-Final的室內佈線材料採用PC-TripleC2.8X2.4超粗橢圓單線，絲質鐵氟龍絕緣。
為了充分利用導電率高達 IACS 101.5% 的 PC-TripleC 導體，絕緣材料採用了絲綢和鐵氟龍的特殊組合，它們具有所有絕緣材料中最低的介電常數（介電常數 2.1 和 2.2）。
實現的效果遠超清潔電源、變壓器和純音頻結構
RTP-Final提供的音質改善效果遠超過清潔電源和降噪變壓器。
產生波形的乾淨電源本身也會產生噪聲，雖然降噪變壓器可以降低噪聲，但有使頻率範圍變窄的缺點。
此外，使用扼流圈和濾波器的清潔電源不可避免地會導致能量和附加特性的降低。
透過使用 RTP-Final，可以在不損失任何電能或增加任何特性的情況下，在超寬範圍內實現 S/N 比的大幅改善，因此無需建造音訊電源。
內部配線使用通過斷造方法生產的新型導線PC- triple C極粗橢圓單線，並對其施以具有卓越介電常數的鐵佛龍絲綢絕緣處理，實現了極致的道通特性。
RTP-2 Final 尺寸:W88*H70 *D148 重量:約1.5kg
RTP-4 Final 尺寸:W88*H70*D265 重量:約2.5kg
RTP-6 Final 尺寸:W140*H70*D233 重量:約4kg
Equipped with the noise reduction function of the outlet stabilizer CS-3K
RTP-Final now comes equipped with the noise elimination function of the popular outlet stabilizer CS-3K.
This noise elimination function eliminates high-frequency noise on the power line, achieving a remarkable improvement in the S/N ratio.
RTP-Final is equipped with this noise elimination function not only on the power line, but also on the ground line, eliminating even high-frequency noise on the ground line.
Noise reduction function inside the power supply box has also been upgraded.
As in the past, RTP-Final is equipped with the natural mineral green carborundum + lithia tourmaline powder inside the machined A2017S aviation-grade aluminum alloy housing, which absorbs and eliminates power supply noise and ground noise while also preventing the generation of static electricity. However,
this time, we have added powders of various minerals, including guiyang stone, which boasts the world’s largest amount of negative ions, to further enhance the noise removal and anti-static functions.
Improved vibration damping performance of legs
The legs of RTP-Final have been upgraded from the previous chrome-plated brass cut-out + vibration-damping sheet to a combination of gold-plated brass cut-out + newly developed kiyoseki-impregnated silicon insulator.
This kiyoseki-impregnated silicon insulator is sold separately as RKI-1803, a smaller version of the well-received RKI-5005, and is now capable of powerfully absorbing and eliminating vibrations from the floor.
The outlets and inlets are made of the highest quality NCF material and pure copper electrodes.
As in the past, RTP-Final’s outlets and inlets use the resin NCF, which does not generate static electricity, a material jointly developed with FURUTECH, and pure copper electrodes that achieve 100% conductivity.
The materials that boast the highest conductivity for the electrodes of other audio-grade and hospital-grade outlets are tellurium copper and beryllium copper, but compared to pure copper electrodes with 100% conductivity, their conductivity is only about 50%, so the difference is clear.
The internal wiring is also of the highest quality.
As in the past, RTP-Final’s indoor wiring materials use PC-TripleC2.8X2.4 extra thick oval single wire with silk Teflon insulation.
To make the most of the PC-TripleC conductor, which boasts a conductivity rate of IACS101.5%, the insulation material is a special insulation made of a combination of silk and Teflon, which have the lowest dielectric constants of any insulation material (dielectric constants of 2.1 and 2.2).
Achieves effects that far surpass those of clean power supplies, transformers, and audio-only construction
RTP-Final provides a sound quality improvement effect that far surpasses that of clean power supplies and noise-cutting transformers.
Clean power supplies that generate waveforms generate noise themselves, and noise-cutting transformers have the disadvantage of narrowing the frequency range even though they reduce noise.
Clean power supplies that use choke coils and filters also inevitably reduce energy and add character.
By using RTP-Final, which achieves an overwhelming improvement in the S/N ratio over an ultra-wide range without any loss of power energy or addition of character, there is no need for audio power supply construction.
The ultimate power box!
- ■RTP-2 Final
External dimensions: W88 x H70 x D148 (mm)
Weight: Approx. 1.5 kg - ■RTP-4 Final
External dimensions: W88 x H70 x D265 (mm)
Weight: Approx. 2.5 kg - ■RTP-6 Final
External dimensions: W140 x H70 x D233 (mm)
Weight: Approx. 4kg
