TELOS 推出兩條全新發燒級電源線 ACTIVE 及 BLUE 隆重登場!
≪ADC （Absolute Direction Conductor） 絕對導體的全新概念≫
由2010年開始, TELOS自研發出了QBT技術之後, 深知要把音響調整到更高的層次, 必需要由電子學來協助; 因此, ACTIVE線材就正正是TELOS用自己調音嘅技術與電子學結合, 去做好每一個電源環節處理的工作。
簡單來說中間模組是集合了TELOS 多項的技術於一身,歷時多年時間才完成。中間的模組分為兩層, 其中一層以自家出品的QNR (Quantum Nosie Resonator) 量子降躁機為核心, 在底層再加上QMT (Quantum Magnetic Tuning) 量子均磁器模組組成。QNR的作用主要針對 AC來電60hz峰值凸波（相位失真）, QNR模組會運用內部電腦偵測，計算及發出相對應的失真同步補償。 另在底層安裝的 QMT量子均磁器模組，情況有如現在V5.1原理一樣，利用電磁波原理回授超低頻在電源中，巧妙利用這個電磁波回授現象有效強化低頻的控制力，尾韻跟音樂流暢感。簡單來說, ACTIVE線材可以說是在High-End界上首次帶有電源處理的電源線。 總而言之,
QNR – 針對相位失真有明顯功效;
QMT – 針對累積的磁場錯亂, 經過消磁而有很直接的改善效果;
那廠方是如何將此模組安裝在ACTIVE 電源線上? ACTIVE 線材原本有四條心, 當中G, N, L 是由電源插頭直接連接往IEC 的，有別於市面上其他品牌的設計。由於ACTIVE 是直接連接往IEC沒有間斷，沒有影響到音樂整體的流暢度. 而且如果中間被切斷了，除了流暢度大打折扣外還會造成動態壓抑，欠缺能量感的問題。由於此模組是直接安裝在電源線上，能夠做到最直接的傳送效果，把QNR的威力發揮到極致。
而且ACTIVE 線材上的這個電子模組安裝方式與原本QNR使用方式完全不同, 因此客戶不用擔心兩者相容性的問題。任何系統只要一使用主動式線材，可以得到相對市場同樣價格的傳統線材所不能達到的相位修正效果，為你帶來前所未有的絕美音色享受。
Description:
TELOS proudly presents two new flagship power cables, ACTIVE and BLUE!
Introducing the revolutionary concept of ADC (Absolute Direction Conductor):
Since the development of the QBT (Quantum Bias Technology) in 2010, TELOS has recognized the need for electronic assistance to achieve higher levels of audio refinement. The ACTIVE cable combines TELOS’ tuning expertise with electronics to optimize every aspect of power delivery.
In simple terms, the central module incorporates multiple TELOS technologies and has been meticulously developed over several years. The module consists of two layers, with the core layer featuring TELOS’ proprietary QNR (Quantum Noise Resonator) for quantum noise reduction. The bottom layer incorporates the QMT (Quantum Magnetic Tuning) module. The QNR module addresses phase distortion caused by AC power’s 60Hz peak waveform. Using internal computer detection, calculation, and corresponding distortion compensation, the QNR module effectively mitigates these distortions. The QMT module, installed in the lower layer, employs principles similar to the V5.1 design, utilizing electromagnetic wave feedback to enhance low-frequency control and improve resonance and musical fluidity. In essence, the ACTIVE cable is the first power cable in the high-end industry to include power processing capabilities.
To integrate this module into the ACTIVE power cable, the cable’s original four conductors (G, N, L) are directly connected to the IEC connector, distinguishing it from other brands’ designs. The direct connection to the IEC ensures seamless musical flow and avoids compromises in smoothness and dynamic expression that would occur with interruptions in the cable. With the module installed directly on the power cable, the transmission is optimized, maximizing the power of the QNR.
Furthermore, the installation method of this electronic module on the ACTIVE cable is entirely different from that of the QNR, ensuring compatibility between the two. By using an active cable, any system can achieve phase correction effects that traditional cables at the same price range cannot achieve, delivering an unprecedented and exquisite audio experience.
Please note that the above translation is based on the provided description and may not accurately reflect the specific technical details or claims made by the original text.
