型式：立體聲後級
輸入：RCAx1；XLRx2
工作形式：立體聲、雙擴大機、橋接
輸出功率：130W x2 @8 ohm；225W x2 @4 ohm；橋接410W x1 @ 8 ohm
頻率響應：5Hz-160kHz ,+0/ -3dB；10Hz-20kHz,+0/ -0.1dB
總諧波失真：0.04%＠全功率輸出；0.004%＠60W
訊噪比：110dB / A-weighted 增益：26dB
阻尼因數：大於1500 @ 20Hz-1kHz
輸入靈敏度：單端/ 1.6V；平衡/ 0.8V 輸入阻抗：單端/ 50k ohm；平衡/ 100k ohm
尺寸：300W x 279D x 133H mm
重量：16 kg
Description:
Type: Stereo Power Amplifier
Inputs: RCA x 1; XLR x 2
Operating Modes: Stereo, Dual Mono, Bridge
Output Power: 130W x 2 @ 8 ohm; 225W x 2 @ 4 ohm; Bridge Mode: 410W x 1 @ 8 ohm
Frequency Response: 5Hz-160kHz, +0/-3dB; 10Hz-20kHz, +0/-0.1dB
Total Harmonic Distortion: 0.04% @ full power output; 0.004% @ 60W
Signal-to-Noise Ratio: 110dB/A-weighted
Gain: 26dB
Damping Factor: Greater than 1500 @ 20Hz-1kHz
Input Sensitivity: Unbalanced/1.6V; Balanced/0.8V
Input Impedance: Unbalanced/50k ohm; Balanced/100k ohm
Dimensions: 300W x 279D x 133H mm
Weight: 16 kg
Note: This description provides information about a stereo power amplifier. It has one RCA input and two XLR inputs. It can operate in stereo mode, dual mono mode, or bridge mode. In stereo mode, it can deliver 130W per channel at 8 ohm, and 225W per channel at 4 ohm. In bridge mode, it can deliver 410W at 8 ohm. The frequency response ranges from 5Hz to 160kHz with a deviation of +0/-3dB and from 10Hz to 20kHz with a deviation of +0/-0.1dB. The total harmonic distortion is 0.04% at full power output and 0.004% at 60W. The signal-to-noise ratio is 110dB/A-weighted. The amplifier has a gain of 26dB and a damping factor greater than 1500 at frequencies between 20Hz and 1kHz. The input sensitivity is 1.6V for unbalanced inputs and 0.8V for balanced inputs. The input impedance is 50k ohm for unbalanced inputs and 100k ohm for balanced inputs. The amplifier has dimensions of 300W x 279D x 133H mm and weighs 16 kg.
