採用 PC-TripleC 導體
SPC-REFERENCE-TripleC 採用以鍛造製法開發、被譽為全球首款音響專用導體的夢幻新材料──PC-TripleC，完整發揮其高純度、高傳輸效率的優勢。
空氣絕緣（Air Insulation）結構
SPC-REFERENCE-TripleC 透過在緩衝層中導入假管（Dummy Tube）結構，成功於線材內部形成空氣層，同時提升導通特性，並利用空氣達到優異的振動抑制效果。
藉由大小共 6 條空氣管管配置，使導體呈現彷彿「懸浮於空中」的理想狀態，無論在傳輸效率或抗震性能上皆達到最佳平衡，帶來高速、開放感十足且反應敏捷的音質表現。
以超高性價比實現特氟龍絕緣
SPC-REFERENCE-TripleC 將原本使用的 PE（聚乙烯）絕緣全面升級為 特氟龍（Teflon，氟系樹脂）。特氟龍在各類絕緣材料中擁有極低的介電率，可顯著提升訊號傳輸速度，但成本高昂，向來只見於高價線材。
有效阻隔外來噪訊的銅箔屏蔽
SPC-REFERENCE-TripleC 採用銅箔屏蔽結構，有效防止外來噪訊入侵。
一般市售喇叭線多為無屏蔽設計，極易受到外部噪訊干擾，導致音質明顯劣化。
雖然有些線材透過強力絞合正負導體來抑制噪訊，但過度絞合往往造成音場壓縮與能量感流失。SPC-REFERENCE-TripleC使用鋁箔或鎂箔的線材主要針對高頻電磁波屏蔽，對音響頻段的實際效果有限，甚至會帶入材料本身的音染。
相較之下，銅箔是最適合音響頻段的屏蔽材料，能在不附加音色個性的前提下，大幅提升 S/N 比，實現純淨自然的聲音表現。
含浸電氣石（Tourmaline）的外層
多數市售喇叭線為追求外觀透明度，外層護套多使用 PVC（聚氯乙烯），但 PVC 在帶電率與介電特性方面表現不佳，對音質極為不利。SPC-REFERENCE-TripleC 特別開發並採用將天然礦石電氣石（Tourmaline）粉末含浸於 PE（聚乙烯）中的外層護套。電氣石又稱「電氣礦石」，具有微弱電位，當受到電流、磁力或振動等外在刺激時，會產生負離子。咩含浸於線材外層的電氣石粉末，會隨著電訊號流動及喇叭振動而產生負離子，發揮優異的防靜電效果，有效防止靜電所造成的傳輸劣化，確保聲音始終穩定純淨。
Using PC-TripleC Conductors
SPC-REFERENCE-TripleC employs PC-TripleC, a groundbreaking material developed through forging methods and acclaimed as the world’s first audio-specific conductor, fully utilizing its advantages in high purity and high transmission efficiency.
Air Insulation Structure
SPC-REFERENCE-TripleC integrates a dummy tube structure in the cushioning layer, successfully creating an air layer inside the cable. This not only enhances conductivity but also achieves excellent vibration suppression through the use of air.
By configuring a total of 6 air tubes of varying sizes, the conductor achieves an ideal state that seems to “float in the air,” optimizing both transmission efficiency and shock resistance, resulting in a fast, open, and responsive sound performance.
Cost-Effective Teflon Insulation
SPC-REFERENCE-TripleC upgrades the originally used PE (polyethylene) insulation to Teflon (fluoropolymer). Teflon boasts an extremely low dielectric constant among various insulation materials, significantly enhancing signal transmission speed. However, its high cost has traditionally made it only available in premium cables.
Copper Foil Shielding to Block External Noise
SPC-REFERENCE-TripleC utilizes a copper foil shielding structure, effectively preventing external noise interference.
Many commercially available speaker cables lack shielding design, making them highly susceptible to external noise, which can lead to noticeable sound quality degradation. While some cables use strong twisting of positive and negative conductors to reduce noise, excessive twisting often results in compressed sound fields and a loss of energy. Cables using aluminum or magnesium foil primarily address high-frequency electromagnetic wave shielding, but their actual effectiveness in the audio frequency range is limited and may introduce sonic coloration. In contrast, copper foil is the most suitable shielding material for audio frequencies, significantly improving the S/N ratio without adding any tonal character, resulting in a pure and natural sound performance.
Tourmaline-Infused Outer Layer
Most commercially available speaker cables use PVC (polyvinyl chloride) for their outer jackets to achieve transparency; however, PVC performs poorly in terms of charge and dielectric properties, negatively affecting sound quality. SPC-REFERENCE-TripleC specially develops and adopts an outer jacket infused with natural tourmaline mineral powder in PE (polyethylene). Tourmaline, also known as “electrical mineral,” possesses a weak electric potential. When stimulated by current, magnetism, or vibrations, it generates negative ions. The tourmaline powder infused in the cable’s outer layer releases negative ions as the electrical signal flows and the speakers vibrate, exhibiting excellent anti-static effects and effectively preventing transmission degradation caused by static electricity, ensuring the sound remains consistently stable and pure.
